Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Cost in Kenmore?
Garage door repair in Kenmore typically costs $150 – $600, and most single repairs land in the $120 – $340 range. A new door installation runs roughly $700 – $2,200 depending on size, material and whether the opener is replaced at the same time. The written estimate always sets the final price, so treat these as honest ranges, not quotes.
What separates a useful price guide from a useless one is knowing which repair you’re actually paying for. A snapped spring and a slow opener both leave you stuck outside, but they cost very different amounts to fix. We’re Lake City Garage Door Repair, and this guide breaks down the same ranges we work from every day in Kenmore.
Key Takeaways
- Most garage door repairs in Kenmore fall between $150 and $600.
- Spring repair is $180 – $340 for one spring, and springs are almost always replaced in matched pairs – so a pair runs about twice that.
- New door installation is $700 – $2,200, and the door is often the smaller decision next to the opener.
- Free estimates and upfront pricing mean you know the number before any work starts.
- Whatever brand is on your door, we know it – LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor.
Garage Door Cost Breakdown (2026)
Here’s how the individual jobs usually price out in Kenmore. Every line is a typical estimated range for the work, and the written estimate you get is what you’ll actually pay.
| Service | Typical Estimated Range (Kenmore) |
|---|---|
| Garage Door Repair (general) | $150 – $600 |
| Spring Repair (one spring) | $180 – $340 |
| Spring Repair (matched pair) | About twice one spring |
| Cable Repair | $130 – $250 |
| Opener Repair | $120 – $320 |
| Opener Installation | $250 – $550 |
| Panel Replacement | $250 – $500 |
| Track Realignment | $120 – $240 |
| Roller Replacement | $110 – $220 |
| New Door Installation | $700 – $2,200 |
Two things move the number up more than anything else: whether a spring needs replacing and whether the opener is part of the conversation. Springs are the most common failure on a door that’s been opening and closing for years, and they’re almost always paired, so a matching set roughly doubles the single-spring figure. Smaller jobs like rollers and track realignment stay low because they’re quick and don’t touch the high-tension parts.
Door type matters too. A single-car door costs less to replace than a double, and a steel pan door costs less than a carriage-style wood one. When people ask us whether a repair is worth it on a door that’s getting old, the answer usually hinges on the door itself – if the panels and frame are still solid, a repair makes sense. If the panel is bent or the door is well past its usefulness, a replacement can make more financial sense.
Opener installation is worth calling out separately because the door and the opener are two different systems. A door is made by Clopay or Amarr or Wayne Dalton or Raynor. The opener is a LiftMaster or Chamberlain or Genie or Craftsman. They need separate knowledge, and a company that only understands one side often leaves the other half of the job to somebody else.
What Affects Garage Door Pricing in Kenmore
Kenmore sits right on the north end of Lake Washington, and the local housing and weather both shape what a garage door job costs here. A few of the factors we see move the number.
- Home age and door wear. Much of Kenmore’s housing stock was built decades ago, and many doors are on their second or third set of springs. Older doors often need more than one part replaced at the same time, which pushes a job toward the higher end of the range.
- Wet-season damp. The lake-effect moisture up here means the hardware sees more moisture than a lot of the country. That shows up as sticking rollers, corroded fasteners and tracks that drift out of alignment. Roller and track work is cheap on its own but adds up if it’s ignored for years.
- Door size. A double-bay door uses more material and heavier springs than a single, so it sits higher in every range – from panel replacement to a full install.
- Door and opener brands. Compatibility matters. A custom door or an off-list opener brand can add time. Being certified across eight of the most widely installed brands – LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor – means most Kenmore homes are covered without a return trip or a special order.
- Whether the opener gets replaced. If the door is being replaced and the opener is older, doing both at once usually costs less than two separate jobs because the work overlaps.
- Urgency and access. A door that’s stuck open and needs securing on a cold morning can cost more than the same repair scheduled ahead. We book calls and give you a straight answer on timing.
One local wrinkle: a lot of Kenmore garages are tight to the driveway or tucked under a deck, and access can affect how a crew has to set up. None of that changes the range much, but it’s the kind of thing a written estimate accounts for that a phone call estimate can miss.
How to Save on Garage Door
You don’t have to pay the top of the range to get a reliable door. A few practical moves keep the cost where it should be.
- Fix small things before they cascade. A noisy roller or a track that’s starting to bend is a cheap fix ($110 – $220 for rollers, $120 – $240 for a realignment) that prevents a more expensive repair later.
- Replace springs as a pair. If one spring snaps, the other is usually the same age and isn’t far behind. Replacing one and coming back for the other costs more than doing both at once. Expect a pair to cost about twice the single-spring range.
- Bundle the door and opener when both are due. If your opener is old and the door is worn, doing the install and the opener installation together saves labor compared to two separate visits.
- Ask for a free estimate. We’ll tell you what the door needs and what it doesn’t. Call (888) 991-5420 and you’ll get a number before any work starts.
- Keep the door serviced. Lubrication and a quick look at the springs and cables keep failures from surprising you mid-winter. Our technicians have up to 11 years of experience and can tell you what’s close to failing.
- Get the right part the first time. A technician who has to order a part and come back is a technician who’s adding a day to your job. We carry parts, which keeps the callback rate down.
The fastest way to save is to know what you’re actually paying for. If you’re not sure whether you need spring repair, garage door spring repair or a new opener, a free estimate sorts it out in one visit. Same-day service is available on many jobs, and we dispatch from early morning to evening.
Safety: Why Some Repair Costs Are Higher
Some garage door work is priced higher because it’s genuinely dangerous, and we won’t pretend otherwise. Springs and cables are under extreme tension. A spring that’s released incorrectly can cause serious injury, and a snapped cable under load is just as unforgiving. This is not a DIY job.
We treat spring repair as a core competency, not an upsell. If you’ve got a broken spring, don’t test it or try to force the door up by hand. Call a trained professional. The $180 – $340 range is the price of getting it done right and safely. Our technicians have up to 11 years of experience with this work.
The same caution applies to openers wired into household power. If the opener is dead or the wiring looks questionable, that’s a job for someone who works on it regularly. Opener repair runs $120 – $320 and opener installation runs $250 – $550, and both are done right the first time.
Can You Fix It the Same Day?
Often, yes. Most repairs – springs, cables, rollers, opener work – can be handled same day when parts are on hand. That’s the reason we carry parts: it lets us finish the job in one visit instead of waiting on an order. We dispatch from 7 a.m. to 7 p.m., so call early and we’ll get to you.
New door installation takes longer by nature. If you’re replacing the door, we’ll schedule it and give you a clear window. Call (888) 991-5420 for a free estimate and an honest answer on timing.
One thing worth knowing: we’re closed on Saturday. If a door fails over the weekend, you can call and we’ll book you for Sunday or the next working day. If you need it secured in the meantime, we can talk through safe options on the phone.
Does Brand Matter for Pricing?
It can. A door or opener in one of the eight brands we’re certified on (LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, Raynor) means we already know the part and the fit, which keeps the job in the normal range. Off-list brands aren’t a dead end, but they may add time for a special order. Whatever brand is on your door, we know the eight most common in Kenmore and can work on them without a second call to someone else.
What Does a Garage Door Opener Repair Cost in Kenmore?
Opener repair in Kenmore typically costs $120 – $320. That covers a range of issues – a motor that won’t run, a remote that won’t pair, a safety sensor that’s misaligned, a gear that’s stripped. If the opener is beyond repair and needs replacing, installation runs $250 – $550. We cover LiftMaster, Chamberlain, Genie and Craftsman, which covers most of what’s installed in Kenmore homes. Call (888) 991-5420 for an exact quote on your opener.
How Much Does a Broken Spring Cost?
Broken spring repair in Kenmore is $180 – $340 for one spring. Because springs are almost always replaced as a matched pair, expect a pair to run about twice that. Never let anyone repair just one spring of an aged pair and call it done – the second one is usually about to fail. If the door is stuck open or won’t come up at all, don’t force it. Call (888) 991-5420 and we’ll get a trained technician out to handle the high-tension work safely.
Is It Cheaper to Repair or Replace My Garage Door?
Usually repair, unless the door is structurally compromised. If the panels are bent, the frame is rotting, or the door is old and failing on multiple fronts, a repair can cost more over time than a new door at $700 – $2,200. For a single failed part – rollers, a track, cables, springs – repair is nearly always the right call. We’ll tell you honestly which side of the line your door is on. Call (888) 991-5420 for a free estimate.
What’s the Most Common Garage Door Repair in Kenmore?
Springs and cables are the most common. With Kenmore’s wet-season humidity and older housing stock, those high-tension parts see a lot of use and moisture over their lifespan. Roller and track issues are also frequent, though they’re cheaper to fix ($110 – $220 and $120 – $240). If you’re hearing a bang from the garage or the door won’t stay up, it’s usually a spring. Call (888) 991-5420 and we’ll take a look the same day when possible.
Do I Need to Replace the Opener When I Replace the Door?
Not always, but it’s worth weighing. A newer opener can usually carry over to a new door. An older opener that’s been struggling is often better replaced at the same time, because the labor overlaps and you avoid two separate jobs. Opener installation runs $250 – $550, so bundling it with a door install keeps the total down. Call (888) 991-5420 and we’ll tell you whether your opener has life left.
What to Check Before You Call
A quick five-minute check before you call helps us give you an accurate estimate over the phone and lets us send the right parts. Look at the door and take note of a few things:
- Is the door stuck open or closed, and can you lift it by hand?
- Is there a visible snapped spring, or a gap in one?
- Does the opener run but the door doesn’t move (a coupling or gear issue)?
- Are the tracks bent anywhere along the run?
- Is the door level, or hanging at an angle?
Don’t try to fix springs or cables yourself. Those are high-tension parts and they’re the reason garage door work is a specialty. Once you’ve noted what you see, call us.
Why Homeowners in Kenmore Call Us
Garage door repair is one of those trades where a generalist can get in over their head. Springs are under tension, openers are a separate electrical system, and a door and its opener are often made by different manufacturers. We handle the whole door – repair, spring repair, opener repair, parts and installation – under one call, so you don’t have to find a second company to finish the job.
We’re certified across eight of the most widely installed brands, we carry parts so the job doesn’t stall, and we treat spring work as core skill rather than a sideline. That’s the difference between a garage door specialist and a handyman guessing at spring tension.
We can work with your insurer if a repair is part of a claim, and we’re happy to walk you through what’s covered and what isn’t. Upfront pricing, free estimates and a satisfaction guarantee are part of how we work. Our technicians have up to 11 years of experience. And we don’t leave you guessing – the estimate is the estimate.
Contact Us for a Free Estimate
If your garage door needs a look, or you’re weighing a repair against a replacement, call Lake City Garage Door Repair at (888) 991-5420. Estimates are free, pricing is upfront, and we dispatch from 7 a.m. to 7 p.m. with same-day service on many jobs. We serve Kenmore and the surrounding area with repair, spring repair, opener repair, parts and installation for every major brand. Call today and we’ll give you a straight answer and a real number.
Pricing reflects the Kenmore market as of 2026. Lake City Garage Door Repair offers free estimates – call (888) 991-5420.
What Our Customers Say
"Opener works, remotes are programmed, no complaints on the work. Took three days to get on the schedule though, so if you've got a car trapped inside, say so when you call."
- Holly Fletcher"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
- Bethany Kowalski"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Allison Walsh