Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateFast, Reliable Garage Door Installation Across Kenmore
If you live in Kenmore and your garage door is original to the house, you already know the sound of it. The groan on a damp morning, the little jump near the top of the track, the way the bottom seal leaves a gap. We install garage doors across Kenmore with the tight spaces and wet winters of this town in mind, not a stock door picked off a shelf. Call (888) 991-5420 and we’ll set up a free measure and a written estimate.
Kenmore is a small city packed into a steep, wooded pocket on Lake Washington, and its garages were never built to one template. That’s exactly why local knowledge matters here. A door that clears a shared townhome wall near the downtown core is a different animal from the wood tilt door on a 1960s rambler up in the trees. We read the site before we order anything.
Why Kenmore Homeowners Call Lake City Garage Door Repair for Garage Door Installation
We’re a garage door specialist, not a handyman outfit that adds a door between other jobs. That focus matters in Kenmore because the market here is split. Down near the redeveloped downtown core, you’ve got rows of new townhomes with zero-lot-line garages and low headroom. A few blocks away, up on the slopes above the Sammamish River, you’ve got 1950s to 1980s ramblers with original wood or early-steel doors that have been swelling and rotting through wet season after wet season.
Those two situations need different doors, different springs and different opener rails. We know the difference before we arrive. Our technicians have up to 11 years of experience, and they’ve worked on everything from single-piece tilt doors to tight-clearance sectional units in stacked buildings.
We’re certified to service eight of the most widely installed door and opener brands, so you won’t hear “we don’t work on that one” when we show up. When we quote a door in Kenmore, we quote the full job: removal, new door, track, hardware, springs and seal. One call covers the whole door.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Our Garage Door Installation Services in Kenmore
New Door Installation
A full replacement in Kenmore usually starts with a close look at the opening, not the catalog. We check the existing torsion spring, cables and drums, confirm the header and jamb are sound, and size the new door to the original opening so it lines up with the trim, the seal and the ceiling clearance. In the older ramblers along the wooded slopes, that often means replacing hardware that’s been corroding for years. Our garage door installation team handles the measure, the order and the install as one job.

Single Car Door Installation
Most of the one-car garages in Kenmore sit under single-story ramblers or split-levels with a low ceiling. We match the door weight to the right spring so the opener isn’t doing work it shouldn’t, and we set the bottom seal tight against the slab. A single car door typically runs $700 to $1500 installed here.

Double Car Door Installation
Double doors are heavier than they look, usually 150 to 350 pounds depending on material and insulation. On a shared-wall townhome lot near downtown Kenmore, clearance matters as much as width. We confirm headroom and side clearance before the door is ordered so nothing binds against the wall on the way up. Expect $1200 to $2200 for a double door, installed.

Custom Garage Door Installation
Some Kenmore garages don’t take a standard size. Tilting original openings on the older ramblers, odd widths in converted spaces, or a door that needs to match a very specific facade on a newer build can all call for a custom unit. We measure the actual opening and spec the door to fit it, rather than forcing a stock size and shimming around the problem.
Trusted Brands We Service in Kenmore
Whatever brand is on your door or your opener, we likely know it. We’re certified to service Clopay, Amarr, Wayne Dalton and Raynor doors, and LiftMaster, Chamberlain, Genie and Craftsman openers. Doors and openers are two separate systems, and they need separate knowledge. We handle both. When we spec a new door in Kenmore, we work within those brands so you get a proven unit with parts you can actually source later. If your existing opener is a Genie or a Chamberlain that’s still in good shape, we can often pair it with the new door instead of replacing everything.
See the difference
Before
After
Before
After
Before
AfterCommon Garage Door Installation Problems We See in Kenmore Homes
The issues that show up in Kenmore are shaped by the trees, the damp and the way this city was built. Here’s what we run into most:
- Needles and fir boughs packed into tracks. Kenmore sits under heavy Douglas fir and bigleaf maple canopy, and after a windstorm off the lake, debris drops straight onto door tracks. A sectional door that’s binding and jumping its track often just needs the debris cleared and the track realigned.
- Moss and algae on north-facing doors. Shaded doors under the canopy go green before they ever fail mechanically. That growth rots original wood panels and corrodes hinges and rollers long before the spring gives out.
- Swollen wood on older ramblers. The marine-wet Puget Sound climate keeps moisture in the air for months. Original wood doors on 1950s to 1980s ramblers absorb it, swell at the edges and stop sealing properly.
- Tight clearances in zero-lot-line townhomes. Newer townhome garages near the downtown core leave almost no room to spare. A mis-sized door or a badly placed opener rail can trap a car inches from a shared wall.
In the older ramblers, a replacement typically starts with checking the existing torsion spring, cables and drums before anything is ordered, because a door sized to a worn opening will fight the hardware from day one. In the newer townhomes, the job usually calls for a low-headroom sectional and a properly sized torsion spring, since the springs carry the door’s weight, not the opener. Either way, a qualified local pro confirms track alignment, door balance and weather seal fit after installation, so the door clears the shared wall and holds up to the damp.
Pricing for Garage Door Installation in Kenmore, WA
We quote garage door installation in Kenmore per job, after a free measure, and the written estimate is the price. Prices below are typical estimated ranges for this market. What moves the number is door size, material, insulation, whether the opening needs framing or hardware replacement, and how tight the access is. A zero-lot-line townhome garage takes more careful fitting than a wide-open rambler bay, and that shows up in the quote.
| Service | Typical Estimated Range |
|---|---|
| New Door Installation | $700 – $2200 |
| Single Car Door | $700 – $1500 |
| Double Car Door | $1200 – $2200 |
| Opener Installation | $250 – $550 |
| Panel Replacement | $250 – $500 |
Nothing gets ordered or installed until you’ve agreed to the quote. Call (888) 991-5420 for a free measure and a written price.
We Also Serve Cities Near Kenmore
We install and service garage doors in Kenmore and the towns around it, including Lake Forest Park, Lake City, Northgate and Bitter Lake. If you’re just over the line from Kenmore, we can still get out to measure and quote. You can read more about our work across Kenmore and the surrounding area, or just call and tell us where you are.
Serving Kenmore, WA – Our Local Coverage Area
We serve Kenmore and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Garage Door Installation in Kenmore
Yes, and it’s one of the most common installs we do in Kenmore’s newer townhome rows. The key is measuring headroom and side clearance first, then choosing a low-headroom sectional and a correctly sized torsion spring so the door travels cleanly without hitting the shared wall. Call (888) 991-5420 and we’ll measure it before anything is ordered.
Because the fir and maple canopy over most Kenmore lots drops needles, boughs and storm debris straight into door tracks, and heavy shade keeps hinges and rollers damp. That debris packs into the track, the door binds, and the spring ends up doing more work than it should. Clearing and realigning the track as part of the install keeps the new door running true.
For a garage attached to the house in Kenmore, an insulated steel door is worth considering, and the right R-value depends on whether the garage shares a heated wall. We don’t publish a single number because it isn’t one-size-fits-all here. We’ll walk through your specific setup and recommend a door, then put the price in writing.
A new torsion spring on a properly balanced door can last years of daily use, but the damp, shaded conditions in Kenmore shorten that compared to a dry climate. Keeping the track clear of needles and the hinges lubricated helps. When a spring does go, it’s a high-tension part and not a DIY job, so call a trained technician.
A steel or insulated steel door resists moss and algae far better than an original wood panel that soaks up moisture under the canopy. Choosing a smooth, finished steel face and keeping the door clear of overhanging limbs makes a real difference. Call (888) 991-5420 for a free estimate on a door built for a shaded Kenmore lot.
If your garage door in Kenmore is original, swollen, or just not clearing the way it should, the fix starts with a proper measure. Call Lake City Garage Door Repair at (888) 991-5420 for a free estimate, upfront pricing agreed before any work starts, and a written quote that holds. We serve Kenmore and the surrounding towns with the same specialist approach, whatever brand is on your door.
Written by the team at Lake City Garage Door Repair.